; -- START GCODE --
G21        ;metric values
G90        ;absolute positioning
M82        ;set extruder to absolute mode
M107       ;start with the fan off

;G28 X0 Y0  ;move X/Y to min endstops
;G28 Z0     ;move Z to min endstops
;G1 Z1 F1000             ;move up slightly
;G1 Y60.0 Z0 E9.0 F1000.0;intro line
;G1 Y100.0 E21.5 F1000.0 ;continue line
;G92 E0                  ;zero the extruded length again

G28 ; Home all axes
G29 ; Bed Leveling Touch
G1 F80
;Put printing message on LCD screen
M117 Printing...
; -- end of START GCODE --




; -- END GCODE --
M104 S0                     ;extruder heater off
M140 S0                     ;heated bed heater off (if you have it)
G91                                    ;relative positioning
G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F80 ;move Z up a bit and retract filament even more
G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
M84                         ;steppers off
G90                         ;absolute positioning
M107       ;turn the fan off; -- end of END GCODE --