3d printer cura settigns

3d printer/MachineSettings.gc

@@ -0,0 +1,33 @@
+; -- START GCODE --
+G21        ;metric values
+G90        ;absolute positioning
+M82        ;set extruder to absolute mode
+M107       ;start with the fan off
+
+;G28 X0 Y0  ;move X/Y to min endstops
+;G28 Z0     ;move Z to min endstops
+;G1 Z1 F1000             ;move up slightly
+;G1 Y60.0 Z0 E9.0 F1000.0;intro line
+;G1 Y100.0 E21.5 F1000.0 ;continue line
+;G92 E0                  ;zero the extruded length again
+
+G28 ; Home all axes
+G29 ; Bed Leveling Touch
+G1 F80
+;Put printing message on LCD screen
+M117 Printing...
+; -- end of START GCODE --
+
+
+
+
+; -- END GCODE --
+M104 S0                     ;extruder heater off
+M140 S0                     ;heated bed heater off (if you have it)
+G91                                    ;relative positioning
+G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+G1 Z+0.5 E-5 X-20 Y-20 F80 ;move Z up a bit and retract filament even more
+G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+M84                         ;steppers off
+G90                         ;absolute positioning
+M107       ;turn the fan off; -- end of END GCODE --