diff --git a/config/ESP_cmds.txt b/config/ESP_cmds.txt
new file mode 100644
index 0000000..7fc4269
--- /dev/null
+++ b/config/ESP_cmds.txt
@@ -0,0 +1,183 @@
+http://192.168.0.172/control?cmd=event,setrange=20,40
+
+https://espeasy.readthedocs.io/en/latest/Plugin/P036.html
+
+
+
+https://espeasy.readthedocs.io/en/latest/Rules/Rules.html
+https://www.letscontrolit.com/wiki/index.php/Tutorial_Rules#TaskValueSet
+
+
+http://192.168.1.109/control?cmd=Monitor,GPIO,13
+http://192.168.1.109/control?cmd=GPIO,2,1
+
+http://192.168.1.109/control?cmd=event,startwatering
+---------------------
+WIFI: 
+CPU:80 MHz
+Crystal:26MHz 
+Flash:40MHz 1MB(8MBit)
+FLASH MODE: DOUT
+Reset Method: DTR
+
+------------------------------------------
+WiFiRepeater:
+popov2 %25TGBnhy6%3D
+------------------------------------------
+Tasmota IR:
+
+Ssid1 popov
+Password1 %TGBnhy6=
+
+GPIO2 - DHT
+
+------------------------------------------
+Espeasy:
+######POST FLASH######
+[2020-06-16 00:23:54] Sending SERIAL: "..."
+[2020-06-16 00:24:17] Sending SERIAL: " WifiSSID popov "
+[2020-06-16 00:24:24] Sending SERIAL: " WifiKey %TGBnhy6= "
+[2020-06-16 00:24:31] Sending SERIAL: "Save"
+[2020-06-16 00:24:33] Sending SERIAL: "WifiConnect"
+
+
+BPM: 
+ Vcc = GPIO-1 (D10) TX
+ GND = GPIO-2 (D4) 
+ D1 SCL
+ D2 SDA
+Analog: 
+relay(water):GPIO-12 (D)
+ 
+MQTT: 
+ESP_Easy/cmd
+GPIOtoggle,2
+---
+
+On startwatering do 
+  gpio,2,1
+endon
+ 
+On stopwatering do 
+  gpio,2,0
+endon
+ 
+On Rules#Timer=1 do  
+   gpio,12,0 //stop watering (close valve)
+endOn
+
+On Soil#RH do
+ if[Soil#RH] < 10
+  Publish ESP_Easy/Water/start,{"soil":"[Soil#RH]"}
+ endif
+endOn
+
+
+---------------------
+
+On System#Boot do
+gpio,0,1
+timerSet,1,50
+TaskValueSet 1,1,1 // set a flag on the Dummy device indicating that your timer is active
+endon
+
+On Rules#Timer=1 do
+gpio,0,0
+TaskValueSet 1,1,0 // reset the timer flag
+endon
+
+On Input1#Switch=1 do
+if [Dummy#TimerSet] = 1 // checking the flag to see if the timer is still running
+timerSet,1,50 // if the timer is running, reset the timer again to 50... or did you want to cancel the timer...?
+endif
+endon
+
+On Input2#Switch=1 do
+if [Dummy#TimerSet] = 1 // checking the flag to see if the timer is still running
+timerSet,1,50
+endif
+endon
+---------------------------
+
+
+ on TempHumidityPressure_OUTSIDE#%RH do
+  TaskValueSet,7,1,[TempHumidityPressure_OUTSIDE#°C]-(100-[TempHumidityPressure_OUTSIDE#%RH])/5  // "7" is the number of the task that the dummy device is on, "1" is its first value where we dump our result
+  if [TempHumidityPressure_OUTSIDE#%RH]>49
+   Publish %sysname%/DewPoint_OUTSIDE/°C,[Dew_point#°C1]
+  else
+   Publish %sysname%/DewPoint_OUTSIDE/°C,[Dew_point#°C1]*  //This asterix shows that the calculation is not correct due to the humidity being below 50%!
+  endif
+ endon
+ 
+ 
+ 
+ 
+ -----------------------
+ current :
+ //1
+On manualwatering do
+ gpio,12,1 //start watering (open valve)
+ timerSet,8,%eventvalue% //timer 1 set for 5 sec
+ Publish ESP_Easy/Water/start,{"soil":"[Soil#RH]", "eventvalue": "%eventvalue%"}
+endon
+On startwatering do
+ gpio,12,1 //start watering (open valve)
+ timerSet,8,10 //timer 1 set for 5 sec
+ Publish ESP_Easy/Water/start,{"soil":"[Soil#RH]"}
+endon
+On stopwatering do
+ timerSet,8,0 //timer 1 set to halt, used to stop watering before the timer ends!
+ gpio,12,0 //stop watering (close valve)
+ Publish ESP_Easy/Water/stop,{"soil":"[Soil#RH]"}
+endon
+On Rules#Timer=8 do
+  gpio,12,0 //stop watering (close valve)
+endOn
+
+
+On Soil#RH do
+  if [Soil#RH]<70 and [Soil#RH]>20
+   //Publish ESP_Easy/Water/start,{"soil":"[Soil#RH]"}
+   event,startwatering
+  else
+   gpio,12,0 //stop watering (close valve)
+   //event,stopwatering
+   //deepsleep,30
+  endif
+endOn
+
+//Time events GMT (17:00 is 14:00GMT)
+On Clock#Time=All,%sunrise% do
+ Publish ESP_Easy/state/time,{"sunrise":"%sunrise%"}
+ event,manualwatering=15
+endon
+On Clock#Time=All,%sunset% do 
+ Publish ESP_Easy/state/time,{"sunset":"%sunset%"}
+endon
+
+//On Clock#Time=All,**:*5 do 
+// Publish ESP_Easy/state/time,{"time":"%systime%"}
+// event,manualwatering=5
+//endon
+//On Clock#Time=All,**:*0 do 
+// Publish ESP_Easy/state/time,{"time":"%systime%"}
+// event,manualwatering=5
+//endon
+
+On Clock#Time=All,**:*0 do 
+ event,nightwatering=3
+endon
+
+On nightwatering do
+ If %systime% < 12:00:00 //%sunrise%
+  event,manualwatering=%eventvalue%
+ Endif  
+ If %systime% > %sunset%//19:00:00
+  event,manualwatering=%eventvalue%
+ Endif
+endon
+
+19240227
+
+
+//2
\ No newline at end of file